Hydrotork is an environment-friendly and energy-saving drying equipment for multifamily buildings, hotels, day-care centres and industries. Thanks to its simple construction it is easy to use, which provides many carefree years of operation.
HT400 is very easy to install and is almost maintenance-free. It is started with one press of a button and stops automatically when the laundry is dry. The drying time is affected by the material of the textiles. Energy consumption is almost independent of how many kilos of laundry is being dried at the same time in the room during a drying session. The drying speed is mostly dependent of the air movement around the drying items. To obtain the lowest possible energy consumption, the Hydrotork has been developed for maximum blowing effect and it stops the drying process when the laundry is dry.
HT400E is connected to the premise’s electricity network.
Hygrotork is sold by selected dealers throughout the country and is usually available for immediate delivery. Please contact us for your nearest dealer. For spare parts, please contact us at info@liljengrens.se or +46 (0) 31 84 62 80 and we will make sure you get the right part(s).
HT400E
Electrical connection
400 V 3 N AC 50 Hz
Heating power: 6,0 kW
Fuse: 10A
Conn. cabel: 5 x 1,5 mm2
Blower fan
Electrical connection: 230 V 1 AC 50 Hz
Motor power: 140 W
Air quantity: 2000 – 2600 m3/h
Control equipment
Micro-computer controlled regulation, display and pushbuttons
Dimensions
Width: 420 mm, Height: 496 mm,
Depth: 412 mm
Electrical safety
Electrical safety and EMC tested by SEMKO. CE marked.
HTFF12
Exhaust fan
Electrical connection: 230 V 1 AC 50 Hz
Motor power: 140 W
Air quantity: 600 m3/h, min. 400 m3/h
Air pressure: 170 Pa
Exhaust air duct: Ø 125 mm
Dimensions
Width 330 mm
Height 130 mm
Depth 380 mm
Wall branch/connection 125 mm
Electrical safety
Electrical safety and EMC tested by SEMKO. CE marked.
Accessory
The air change device LVX 12 is available as an accessory to Hygrotork, get more information here.